Stephan van Vuren

Stephan van Vuren

AirHub Knowledge Series: UK Drone Regulations 2026 Explained for EU Operators

UK Drone Regulations 2026

At the start of 2026, the United Kingdom’s drone regulatory framework underwent one of the most significant overhauls in recent aviation history. The UK Civil Aviation Authority (CAA) implemented a modernised set of rules designed to enhance safety, accountability, and traceability in a landscape where drones are used for everything from recreation to professional operations. For EU pilots and enterprise operators planning to fly drones in the UK, these changes are important to understand because European certificates and operator numbers no longer grant automatic access under UK law. 

In this blog we will break down the key elements of the new regime: what’s changed, what’s required, and how overseas operators can ensure compliant flights in the UK under the updated framework.

A New Classification System: UK0 to UK6

One of the biggest structural changes is the introduction of a UK‑specific class marking system for drones. From 1 January 2026, all new drones placed on the UK market must carry a UK class mark ranging from UK0 to UK6, similar in intent to the European C‑class marks used under EASA. 

The class marking system groups aircraft according to safety and performance characteristics. For example:

  • UK0 and UK1 generally cover lightweight, low‑risk drones.

  • UK2 and above introduce heavier or more capable drones that have additional operational implications.

Importantly for EU operators, existing European C‑class markings will be recognised as equivalent to the corresponding UK class until 31 December 2027. That means a drone with a C1 mark can be treated as UK1 for nearly two years, giving pilots and operators time to transition without immediate equipment changes. 

After 2027, non‑UK class marked drones will be treated as “legacy” and will fall under specific transitional rules until full compliance is required.

Lower Registration Thresholds and Mandatory Flyer ID

Another major shift is the change in registration and competence requirements. Previously, UK rules required registration and a Flyer ID only for drones weighing 250 g and above. Under the 2026 regime, this threshold has been lowered to 100 g. 

In practical terms:

  • Anyone planning to fly a drone weighing 100 g or more must first pass a CAA online theory test to obtain a Flyer ID. This free test demonstrates basic knowledge of safe and legal drone operation.

  • The Operator ID, which is the UK equivalent of the EU operator number, must be obtained by the owner or responsible organisation of the drone if it has a camera and weighs 100 g or more, or weighs 250 g or more regardless of camera equipment. 

It is important to note that EU remote pilot certificates and operator numbers are not recognised in the UK. EU holders of A1/A3 or A2 certificates will still need to obtain UK Flyer IDs and Operator IDs to fly legally. 

Remote ID: A Digital “License Plate” in the Sky

Remote Identification (Remote ID) is another cornerstone of the new UK rules. Similar to trends seen globally, Remote ID enables enforcement, airspace services, and other authorised bodies to identify and track drones in real time by receiving identification and position data broadcast by the drone. 

Under the UK framework:

  • From 1 January 2026, Remote ID is mandatory for drones equipped with UK class marks (UK1, UK2, UK3, UK5, and UK6). 

  • From 1 January 2028, the requirement will expand to cover the majority of legacy and unmarked drones with cameras weighing 100 g or more, ensuring broad compliance across the user community. 

Remote ID functions as a digital license plate, broadcasting details like the drone’s identity and location, which enforcement bodies can use to ensure accountability and safety.

Operators are encouraged to set up Remote ID early, even if enforcement is phased in over a few years. 

Age and Supervision Rules

In recognition of the growing diversity of drone users, the new rules include specific provisions for young operators. UK pilots under 18 years old can obtain a Flyer ID and fly independently, but younger children (under 12) may only operate drones under the supervision of someone aged 16 or older. Parents or guardians of children attempting the online test must also be registered and possess an Operator ID. 

This reflects the UK CAA’s effort to balance safety, inclusivity, and education for new pilots.

What the Changes Mean Practically

For EU operators, the implications are clear:

  • You must register with the UK CAA and obtain both Flyer ID and Operator ID to fly legally in the UK if your aircraft and flight fall under the applicable weight and equipment categories. 

  • European certificates do not automatically apply in the UK, even if you hold current A1/A3 or A2 qualifications. 

  • Remote ID will become part of everyday operations, and operators should plan ahead for compliance before the full 2028 rollout. 

These changes were designed to improve safety, accountability, and airspace awareness in increasingly busy skies, while also fostering innovation and integration with emerging services. 

AirHub Perspective: Supporting Cross‑Jurisdictional Compliance

From an operational and regulatory standpoint, navigating different regimes across Europe and the UK highlights the importance of compliance tools and expert support.

At AirHub, we help operators:

  • Monitor regulatory differences between EU and UK frameworks

  • Plan operations compliant with both EASA and UK CAA requirements

  • Manage pilot qualifications and registrations, including Flyer ID and Operator ID tracking

  • Integrate Remote ID and other safety requirements into flight planning and execution

Whether you are flying for enterprise missions, inspections, public safety tasks, or recreationally, our software and consultancy services make it easier to stay compliant in multiple jurisdictions - without guesswork.

Final Thought

The UK’s 2026 drone rules are a landmark moment in unmanned aviation, marking a shift toward enhanced identification, accountability, and safety for all users. EU operators should take note and act early to ensure lawful flights in UK airspace.

If you are planning cross‑border operations or need help aligning your fleet with new UK and EU requirements, the AirHub team is ready to help.

Ready to see AirHub in action?

Book a demo and find out.

Related articles

Multiple drones flying over large buildings with manned aviation in the close proximity

Content

Why to establish U-Space airspace

U-Space represents the next major advancement for the drone industry. It will allow drone operators to conduct a large number of Beyond Visual Line of Sight (BVLOS) operations in complex environments, such as above cities and in controlled airspace. In 2022, the European Union Aviation Safety Agency (EASA) published the European regulatory framework for U-Space, which will take effect on January 26th, 2023. For local authorities, municipalities, provinces, member states, and all other relevant entities that may benefit from U-Space airspace, it is important to understand the reasons for establishing U-Space airspace.


The U-Space concept

As of 2023, member states have the ability to designate U-Space airspace to specific areas of the existing airspace. In U-Space airspace, traffic is controlled by a U-Space service provider, while the traditional air traffic management system (ATM) is still overseen by air traffic controllers. However, the capacity for drone operations is often limited due to the workload of radio communication.

U-Space is defined as a set of specific services and procedures designed to ensure safe and efficient access to airspace. It relies on a high level of digitalisation and automation. Within designated U-Space airspace, four mandatory services will be provided to guarantee safe and efficient operations:

  • Network Identification Service This service provides the identity of operations in U-Space airspace. Moreover, the location and trajectory of the drone during the operation is visible for monitoring and management purposes.

  • Geo-awareness Service With the geo-awareness service, the drone is always aware of the operational environment. Examples of this include airspace limitations (e.g. no-fly zones) or time limitations due to other traffic.

  • Flight Authorization Service Before each flight, the flight authorization service will ensure that the intended trajectory is free of conflicts. It is also referred to as strategic deconfliction.

  • Traffic Information Service During the flight, traffic information service must be provided in the U-Space airspace. If there are any other aircraft nearby, the traffic information service must alert the operator.

These services are provided by the U-Space Service Provider, which is a special company that's been certified and approved. But before U-Space can be used, airspace needs to be designated for it.


Not just for safety

With the increasing number of drones in more complex situations and operations, safety is an important reason to establish U-Space. In the coming years, drone operations beyond the sight of a pilot (BVLOS) will increase, as will the size and weight of the drones themselves. Therefore, the risk of integrating drones into the existing airspace without the introduction of a new traffic management concept will also increase. This risk is particularly significant in complex environments such as airport and heliport environments or populated cities.

However, the reasons for establishing U-Space are not limited to safety. Environmental, security, privacy or economy factors may also necessitate the creation of a controlled airspace for drone operations. From an environmental perspective, limiting traffic density may be a reason, while flights over sensitive sites may be restricted for security purposes.


Taking all stakeholders into account

However, activating U-Space requires authorities to undergo a rigorous process known as the 'Coordination Mechanism.' This mechanism includes conducting an Airspace Risk Assessment, taking into account various data sources and information from stakeholders. Since the reasons for establishing U-Space can vary or may include multiple factors, the process for establishing U-Space considers input from all stakeholders. By incorporating both aviation and non-aviation stakeholders, data can be gathered to design the U-Space airspace in the most efficient manner.

This process within the Coordination Mechanism should culminate in a decision to implement U-Space or not, a "green" or "red" light. Therefore, proper preparation is essential.


How AirHub can assist in the process

With operational and legal expertise and experience in both manned and unmanned aviation, AirHub can assist Civil Aviation Authorities (CAAs), Air Navigation Service Providers (ANSPs), and local governments in the process of establishing U-Space. AirHub can advise on whether U-Space may be a solution for any Safety, Security, Environmental, Privacy or Economy concerns. At AirHub, we have also established a workflow to perform Airspace Risk Assessments in a compliant and efficient manner. In this way, we can support CAAs, ANSPs, and local governments in the process of establishing U-Space. For an example of how AirHub has assisted in a large scaled European project, check out or AMU-LED case.

A manned drone flying above a canal with regards to the Certified Category

Content

The Road Towards the Certified Category

With the EASA regulatory framework that became effective on the first of January this year, UAS operations are divided into three categories. While most drone operators are currently focussing on the Open and Specific Category, many manufacturers and even some operators have started their preparations towards operating in the Certified Category.


What does the Certified category look like?

Operations within this category are classified as unmanned flights with the highest level of risk. So, this category will include all operations where the risk cannot be mitigated to an acceptable level with the risk based approach that is applied through the SORA in the Specific Category. These flights include for example passenger flights, flights over assemblies of people and UAS operations carrying dangerous goods this. These certified operations will be further divided into three types of operations by EASA:

  1. International flights with certified cargo drones conducted under instrument flight rules, similar to current international cargo flights.

  2. Operations in an urban or rural environment in U-Space airspace, which include cargo or passenger flights.

  3. Drone operations with the presence of a pilot on board, comparable with the operations as mentioned in #2. Also, operations within Specific Assurance and Integrity Level (SAIL) V and VI of the Specific Category will fall into this category.


For all of the above mentioned operations, regulations will be very similar to the current legislative framework for manned aviation. So what can we expect?

Drones, or electrical Vertical Take-Off and Landing (eVTOL) aircraft, always need a type certificate and a certificate of airworthiness. Furthermore, the operator will need an operational approval, and the remote pilot will need a pilot license. But regulations are not limited to the operator. Since operations need to be facilitated with drone airports, called vertiports, EASA will also set operational requirements for take-off and landing facilities.


What are the next steps?

First, EASA will come up with a opinion that will cover certification aspects for operation type #3 mentioned above, these will also be applicable to UAS operations in the high-risk categories (SAIL V and VI) within the Specific Category. EASA expects to publish this opinion at the end of 2022. Next, a second opinion will be published for both operation types #1 and #2, which is expected to be published at the beginning of 2024.

So It will take some time before a regulatory framework for Urban Air Mobility becomes effective, however, in the third quarter of 2025 (as planned by EASA) the regulations for an unmanned UAM flights will be be published and in effect. Until then, we have to validate the business case for UAM, the technical feasibility and think about the social impact that UAM will have on our society and take the necessary steps to become operational in about five years.


How we prepare ourselves for the Certified Category at AirHub

At AirHub, we are always improving our products and services. Our team of experienced software developers are working on several integrations to facilitate Certified Category operations in our Drone Operations Center in the near future. Together with our partner Altitude Angel, for example, we are working on a full U-Space and UTM integration in both Europe and the United States. In the meantime our consultancy team is already gaining a lot of experience with drone operations in the Specific Category and is preparing for the first UAM flights in the Netherlands as part of the SESAR JU AMU-LED project. And as project manager of the Dutch Drone Delta we are working towards incorporating Urban Air Mobility as a positive, sustainable and accepted, social, economic and environmental form of mobility into society.

Two drones flying next to each other\

Content

UAS Operations in the Open Category

The EASA regulation for UAS will be coming into force on the 31st of December 2020 and from that moment many commercial drone operations will be conducted within the Open Category. But what types of operation are possible within this category? And what requirements do you have to fulfil when operating within this category?

With the introduction of the European legislation it will no longer be possible for drone operators to apply for an operational authorisation under their national legislation. Instead they will have to fulfil the requirements of the #EASA Open or Specific Category. But how do you determine if your operations falls within the Open Category? And when you can operate in this category, what requirements do you have to fulfil?


Operations within the Open Category

The Open Category is basically a framework that is dived into three subcategories. To determine if your operation falls within one of the subcategories of the Open Category you will first have to check if you can perform your flights within certain limitations, for example:

  • Your operation can only be conducted up to 120 meters above surface level

  • The maximum take-off weight of your drone must be less than 25 kgs

  • Your operation may only be conducted within Visual Line Of Sight (VLOS)

  • You do not carry dangerous goods or drop any material from the drone

  • You do not fly over assemblies of people

If this is the case there is a big chance you can operate within one of the subcategories (A1 - A3) of the Open Category. However, there are a few limitations depending on the weight of your drone. One of the most limiting factors is the safe distance that you have to keep from uninvolved people and urban areas.

The table below provides a clear overview of the three subcategories within the Open Category and the associated weights.

So what can we extract from this table? When we take a closer look we will see that the following types of operations are allowed within the Open Category:

  • Flights over uninvolved people with drones lighter than 900 grams, e.g. flying your DJI Mavic Air within a residential area

  • Flights at a safe distance (more than 30 meters) of uninvolved people with drones lighter than 4 kgs, e.g. mapping a construction site with a DJI Phantom 4 RTK

  • Flights at a safe distance (more than 150 meters) from urban areas (such as residential-, recreational and industrial areas) with drones lighter than 25 kilograms, e.g. performing a coastal surveillance flight with a Matrice 300

As we can see this offers a lot of potential for many different types of operations. However, national (aviation) authorities are allowed to designate certain zones as "Specific Category Only". These zones, for example areas around airports or heliports, will be shown on an airspace map - such as the one available in our AirHub Drone Operations Center. This may limit your operations within the Open Category and force you to operate in the Specific Category.

Now that we know when an operation takes place within the Open Category we will take a look at how you can determine the requirements you will have to fulfil when operating within this category.


General requirements

Operating your drone within the Open Category means you have to abide by some general rules and you will have to fulfil certain requirements. And depending on the subcategory (A1 - A3) you will operate in, additional rules and requirements will apply (which we will explain in the below).

The first thing you have to do when planning to operate your drone in the Open Category is register yourself or your company in the national registry. This is mandatory for all drones that weigh more than 250 grams or have a camera on board (unless it is a toy).

After registering it is time to develop operational procedures that are adapted to the type of operation and the risk involved. As a minimum, these should include:

  • Procedures on how to operate the UAS in accordance with the user's manual provided by the manufacturer, including any applicable limitations;

  • Guidelines to effectively use and support the efficient use of radio spectrum in order to avoid harmful interference;

  • Guidelines how to designate a remote pilot for each UAS operation;

  • Procedures to ensure that the remote pilots and all other personnel performing a task in support of the operations are familiar with the user's manual provided by the manufacturer of the UAS;

  • Competency requirements for the remote pilot(s) and for personnel other than the remote pilot, a description of in-house on-the-job-training courses;

  • Procedures how to check and update information concerning any geographical zones in the geo-awareness system when applicable according to the intended location of operation; g) Procedures how to comply with the operational limitations in geographical zones;

  • Procedures to ensure that the UAS is in a condition to safely complete the intended flight, and if applicable, check if the direct remote identification works properly;

  • Procedures to verify that the mass of the UAS does not exceed the MTOM defined by the manufacturer or the MTOM limit of its class - if the UAS is fitted with an additional payload; j) Procedures to ensure in the case of an UAS operation in subcategory A2 or A3, that all involved persons present in the area of the operation have been informed of the risks and have explicitly agreed to participate.

  • Procedures to observe the operating environment, check the presence of obstacles and check the presence of any uninvolved persons;

  • Procedures to check if the remote pilot is not performing duties under the influence of psychoactive substances or alcohol or if he/she is unfit to perform its tasks due to injury, fatigue, medication, sickness or other causes;

  • Procedures how to keep the drone in VLOS and maintain a how to perform a thorough visual scan of the airspace surrounding the unmanned aircraft in order to avoid any risk of collision with any manned aircraft;

  • A procedure on how to discontinue the flight if the operation poses a risk to other aircraft, people, animals, environment or property; o) If the remote pilot is assisted by a visual observer, a procedure to ensure clear and effective communication between the remote pilot and the visual observer.

  • A procedure preventing the remote pilot to fly close to or inside areas where an emergency response effort is ongoing, unless you have permission to do so from the responsible emergency response services.

  • A procedure to fly higher than 120 meters when operating close to an object (within 50 meters) - up to a maximum of 15 meters above the object on request of the administrator.


When we look at the required procedures above we can distinguish a clear difference between commercial operations - companies with personnel other than the remote pilot - and operations performed for recreational purposes. For recreational operations, operating in accordance with the user manual of the drone will normally be enough, commercial operators however will probably want to set up an Operations Manual for their operation.

Now it is time to take a closer look to the rules and requirements for the three subcategories within the Open Category.


Operations within subcategory A1

As we can see in the table above you are allowed to operate drones with a maximum take-off weight (#MTOW) less than 900 grams in this subcategories. These drones normally have a C0 or C1 CE-marking. The difference however is that, to fly a drone heavier than 250 grams in this category (C1) you will need to complete an online training and test before you are allowed to operate.

And where you are allowed to intentionally overfly uninvolved people with drones C0 lighter than 250 grams, this is not the case for C1 drones between 250 - 900 grams. With these drones there must be reasonable expectation that no uninvolved person will be overflown. And in the event of unexpected overflight of uninvolved persons, you shall reduce as much as possible the time during which the drone overflies those persons.


Operations within subcategory A2

In subcategory A2 you are allowed to operate drones up to 4kg, these drones will have a C0, C1 or C2 CE-marking - the latter are the ones between 900 grams and 4 kg MTOW. When flying a C4 marked drone you will have to make sure the UAS operations takes place at a safe horizontal distance of at least 30 metres from uninvolved people. However there is an exemption to this when you operate with an activated low-speed mode (max 3 m/s). In this case the minimum distance is reduced to 5 meters when the weather conditions, obstacles in the area and performance of the drone allow it.

Just like when operating a C1 drone in the A1 subcategory, you will need to complete an online training and test to operate with C2 drones in the A2 category. However, you will also need to complete a practical self training and a theoretical test at a recognised (governmental) facility.


Operations within subcategory A3

Again looking at the table above we see that the A3 subcategory is a little bit more restrictive than the other subcategories but that it allows you to operate much heavier drones - up to 25 kgs. These drones will be marked with either a C0 to C4 CE-marking, but you are also allowed to operate drones that have been privately build (e.g. model aircraft).

Flights within this subcategory have to be conducted in an area where the remote pilot reasonably expects that no uninvolved person will be endangered within the range where the unmanned aircraft is flown during the entire time of the UAS operation. This means you have to keep a safe horizontal distance of at least 150 metres from residential, commercial, industrial or recreational areas.


Fulfilling the requirements

Now that you know how to assess if your operations falls within the Open Category and you know how to determine the requirements and rules applicable to your operation it is time to fulfil these rules and requirements. So how can you do this? This is were we come in at AirHub.


How AirHub can help

At AirHub we have guided many organisations across various industries with setting up a safe, efficient and compliant drone operation. Contact us to take advantage of the experience and expertise of our consultants and trainers. Our consultants will help you with setting up procedures specific to your operation. Our trainers will help your crew get certified and will train them in safely conducting your type of operation. And with our AirHub Drone Operations Management platform you will be able to efficiently plan, execute and manage your drone operations.